Technical documentation¶
Timeout on sensors¶
As all keys are not always returned by the teleinformation, a timeout has been defined only on the sensor for ADCO frame. This timeout has been set to 3 minutes. All other sensors timeouts are set to 0.
xPL schema¶
Two new xPL schema have been defined for this plugin:
- teleinfo.basic
- teleinfo.short
teleinfo.basic¶
xpl-trig¶
There is no xpl-trig message for this schema
xpl-cmnd¶
There is no xpl-trig message for this schema
xpl-stat¶
Note
You will find more informations about the schema keys in the description of the teleinformation frame.
This is the classic message. Notice that the device identifier corresponds to the ADCO field:
teleinfo.basic
{
adco=...
optarif=...
isousc=...
base=...
iinst=...
imax=...
motdetat=...
[hchc=...]
[hchp=...]
[ejphn=...]
[ejphpm=...]
[bbrhcjb=...]
[bbrhpjb=...]
[bbrhcjw=...]
[bbrhpjw=...]
[bbrhcjr=...]
[bbrhpjr=...]
[pejp=...]
[ptec=...]
[demain=...]
[adps=...]
[papp=...]
[hhphc=...]
[ppot=...]
[iinst1=...]
[iinst2=...]
[iinst3=...]
[imax1=...]
[imax2=...]
[imax3=...]
[pmax=...]
}
teleinfo.short¶
The teleinfo.short schema is sent when the max intensity is reached on a 3 phasis installation.
xpl-trig¶
There is no xpl-trig message for this schema
xpl-cmnd¶
There is no xpl-trig message for this schema
xpl-stat¶
This is the message sent when for a 3 phasis installation, the max intensity is reached. Notice that the device identifier corresponds to the ADCO field:
teleinfo.short
{
adco=...
adir1=...
adir2=...
adir3=...
iinst1=...
iinst2=...
iinst3=...
}